Skip to content

Before You Start

The Getting Started guides that follow leverages the standalone punchplatform. Make sure you get the latest one from our download area.

In minutes you will be able to run, operate, test and develop various use cases. The standalone punchplatform is also very useful in operation, coupled with your production platform, to run prototype or test setups either in sandbox mode or directly on the production traffic.

Danger

What you cannot do is to go production with the standalone, that is not its purpose. For production, use the official deployment packages. They take care of properly installing the punchplatform components. The PunchPlatform team will provide production support only on versions installed using the official deployment packages.

Requirements

At least 8 GB of memory. RAM requirement will depends on the number and the complexity of storm/spark topologies you will be running (e.g. input and output channels, tenants, ...).

The standalone runs on the following systems:

  • MacOS Sierra 10.12 or later,
  • Ubuntu 16.04 LTS or later (64bits),
  • Debian 7 or later (64bits),
  • CentOS/RHEL 7 or later (64bits)

In all cases check if you have the required dependencies:

  • bash
  • jq 1.5 (or above)
  • curl
  • python 2.7 with virtualenv and pip modules 'Jinja2' and 'PyYAML' installed

Mac OS

Note

we assume that HomeBrew is already install on your machine

1
2
3
brew install jq curl
sudo easy_install pip
pip install virtualenv PyYAML Jinja2

Ubuntu/Debian

1
2
sudo apt install curl jq python-minimal openjdk-8-jdk unzip python-pip python-virtualenv
pip install PyYAML Jinja2

CentOS/RedHat

1
2
3
4
5
sudo yum install zip unzip wget
sudo curl "https://bootstrap.pypa.io/get-pip.py" -o "get-pip.py" && sudo python get-pip.py
sudo pip install virtualenv PyYAML Jinja2
sudo wget https://github.com/stedolan/jq/releases/download/jq-1.5/jq-linux64 -O /usr/bin/jq && sudo chmod +x /usr/bin/jq
sudo yum install java-1.8.0-openjdk-devel

Important

A troubleshooting procedure for the standalone is available at Troubleshooting your standalone

Congratulation, now we can get started using the PunchPlatform !

Installation

This chapter assumes you have already downloaded the standalone PunchPlatform archive and unzipped it: PunchPlatform Download Area. That is, you should have a punchplatform-standalone-x.y.z directory on your filesystem.

Important

You must install the Standalone as a non-root user. The PunchPlatform should be installed/run under your standard user account.

1
2
cd punchplatform-standalone-x.y.z
./install.sh -s

This unarchives all our friends (Kafka, Storm, Elasticsearch, Spark etc...), and patches their configuration files (cleanly) so that you have a simple local PunchPlatform setup. Any file related to the PunchPlatform will be installed under this directory, nowhere else on your machine. When a prompt ask you to patch your environment, if you answer "yes", it will only add a few lines at the end of your ~/.bashrc (on linux) or ~/.bash_profile (on MacOS) to update your path variable. You then only need to start a new terminal.

If you prefer not impacting your environment, just say no. To setup your environment you must then execute the following command every time you start a new terminal:

1
source ./activate.sh

Assuming you are happy with a local setup, you can start all of the standalone platform components (Zookeeper, Storm, Elasticsearch, Kibana, Spark).

1
punchplatform-standalone.sh --start

Check if your standalone version is running properly:

1
punchplatform-standalone.sh --status